https://www.lifetimeledlights.com/
94 wrangler 2.5 cylinder head valve leak

Author Topic: 94 wrangler 2.5 cylinder head valve leak  (Read 5614 times)

gpecorel56

  • Guest
94 wrangler 2.5 cylinder head valve leak
« on: June 11, 2011, 12:01:12 PM »
I have a 94 wrangler with a dead No.3 cylinder about 5lbs I did an air test and found a bent exhaust valve. After changing that I had air tested again and now found a slight leak in the intake valve, replaced that. I now still only have 60 lbs comp and leaking air when air testing it but cant find where. All other cylinders are about 125. At witts end. Does anyone PLEASE have a head to fit this 94 wrangler 2.5. Please call me asap at 585-590-0040 In desperate need. Thanks everyone for looing and pointing me in the right direction. Gasper

Offline MrMindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 3459
Re: 94 wrangler 2.5 cylinder head valve leak
« Reply #1 on: June 13, 2011, 01:10:42 PM »
Does it test the same wet as dry? I\'m sure you\'ve thought along the same lines having already replaced valves, just wanting to make sure you\'re chasing the right thing in throwing a new head on it....

Michael Maskalans
#571 Last Minute Motorsports
High Miler: 07.5 Ram 6.7 6sp 4x2, ARB, 19.5s
2003 R'Audi Allroad 6sp
Road Block: 98 Dakota 203/205 triple stick, 42" SXs
Dumpbus: 97 Ram 24v P-pumped, RoadRanger 13sp
'87 AMC Eagle Wagon

Offline rejeep

  • Hero Member
  • *****
  • Posts: 629
Re: 94 wrangler 2.5 cylinder head valve leak
« Reply #2 on: June 30, 2011, 08:01:54 AM »
do a leak down test..
you might be looking in the wrong direction..

 

test block /modules/smf/index.php?topic=2465.0