project hardcore weekend web wheeler

[luvmyxj]

step 1 :clean an area in the driveway for the jeep
step 2 :remove unnecessary parts


step 3 :have the wife come out and ask you if you know what you are doing
my plans for it are 8.8 rear,built 30 front ,35\" tires ,long arms and some other cool stuff
some things i\'ve already done are on board air,flowkool water pump,some lift,bilstein 5150\'s,custom front and rear bumpers,steering box from a v8 durango,power brake booster and master cylinder from a 01 wj,and cup holders

[smichaelR22]

looks good!

what tires you runnin?

[fedrusion]

Wow, when\'sit going to be rolling again?

You building the Long arm\'s?

[luvmyxj]

i\'m gonna run 35\'s so keep a eye out for me.i\'m gonna build my long arms and use something similar to this design with a custom cross member, haven\'t decieded if i wanna do 3 link.or y-links yet
http://pages.prodigy.net/dmacock/links/DSC01133
if time and money is right i hope to be done by the end of june,if not definately before the team picnic.

my grocery list:
all new axle joints
heim steering setup
3/16 4\"x3\" angle iron for frame stiffners,and steel for arms and crossmember
tires and a few other things

[jeepfd16]

Looking like a pritty darn good start to things. Cant wait to see it when its done should be looking good!

[MrMindless]

I hope the CMUs don\'t sink into the driveway when it gets hot! :)

sweet.

[fedrusion]

Did you see the link smike posted for the site that custom builds links. I was thinking about getting my lowers from them then adding tabs to make them into y-links.

[fedrusion]

http://www.suicidedoors.com/catalog/4-link-parts/4-link-bars

[fedrusion]

Whats in the Built 30?

[Ryan_25]

Why buy them when you can build them for less.

[luvmyxj]

well i built my current lowers from rustys super flex joints and skyjacker poly ends.so ill reuse the super flex and tube inserts and either the poly ends again or ballistic hard ends.so basically need tube.
as far as the 30 in gonna get inner and outers from a 97\' newer i believe to run 760x axle joints,and 4:10 gears to match the 8.8 and down the road get an aussie

[smichaelR22]

how much you looking to spend on 35\"s?

:)

[luvmyxj]

as cheap as cheap can be $200 at the most for now,gotta lot of other stuff i need first

[luvmyxj]

picked up a ford 8.8at all city for what was suppose to be $125 but after making me wait 25 min they knocked $10 bucks off,so i got it for $115.got it home stripped it down,wire wheeled it, made up some perches and spring plates and welded them in ,brake lines routed as well.still need to swap e-brake cables from the d35 and put on shock mounts.in case your wondering it has 4:10 gears with a trac lock.

[Ryan_25]

All 297x joint shafts will fit a 760x joint.