HP30 w/ 3.73s

[Spencer]

high pinion dana 30 from XJ. 3.73 gears. no shafts, brakes, or unit bearings. knuckles included.

Previous owner (dustin bylina) said owner before him (kyle from rausch) said seals should be replaced. unknown miles but gears have good wear pattern. From PA and not rusty. UCA bushing need to be replaced on driver's side. has been wheeled.

the plan is to gear a HP30 to 4.10 and i dont want to kill this one if someone wants it. so...

$125
or
$75 + HP30 housing

[MrMindless]

did he say it was complete when you bought it? sounds like "dustin complete"

[Spencer]

it was pretty complete when i bought it. unit bearings are ehh. brake are ehh. i wouldnt reuse them.
shafts are my spares for when i finally blow by CVs in my ZJ. they are still kicking with the 33" TSLs. smike will verify, i gave them hell at rausch in january. we'll see if they last this weekend too!

i'll throw in the unit bearings and calipers if someone wants those. i could have a set of ujoint shafts in rochester by mid may if someone wants them to go with it for a few extra $$. i anticipated someone throwing it in a TJ or doing it with a 3.73 geared 8.8, or something like that.

[etk300ex]

Is this a front rear? 

[smichaelR22]

o man this is from bigZJ?  haha

[Spencer]

Is this a front rear? 

hahaha yeah i guess i should have gone with the typical axle ad. something like:

hey guys,,,,what i have here is a dana 30 rear out of a a jeep,,,,i dont know what gears its got,,,i can look if you want it,,,well i bought it from this guy,,,he said it needs new seals,,,,i dont know anything about it,,,come look for yourself,,,the guy i got it from said it was complete,,,,,i want $600 for it because thats what i paid,,,i gotta sell because the wife is bitching about to much in the garage,,,i can txt pics to ur phone

[MrMindless]

perfect!

[Spencer]

build is changing directions... this needs to go.

i have already bought a really nice set of 4.10 gears for it and a master install kit (needs seals).

so hp30 + 4.10 gears + install kit ...$250

also have a ford 8.8 with 4.10 gears. open. $175.

this could make a sweet swap for a TJ...

[bear555]

Sorry i got lost, what happened to the 3.73?

[Spencer]

sorry, it did get confusing. here is what i have

Item 1: High Pinion Dana 30. 3.73 gears installed. no shafts

Item 2: HP30 Ring and pinion. 4.10 ratio. vgc

Item 3: Ford 8.8. 4.10 gears. complete.

[bear555]

I'll take the 3.73 axle. I'll PM you my Phone #

[MrMindless]

Disk or drum 8.8?

[Spencer]

Disk or drum 8.8?

disk. its a nice piece. was pulled from a yard in PA. has some rust on the housing, but nothing like a NY axle would be.