CLASSIFIEDS => Parts => Topic started by: Spencer on March 26, 2012, 10:50:41 PM
Title: HP30 w/ 3.73s
Post by: Spencer on March 26, 2012, 10:50:41 PM
high pinion dana 30 from XJ. 3.73 gears. no shafts, brakes, or unit bearings. knuckles included.
Previous owner (dustin bylina) said owner before him (kyle from rausch) said seals should be replaced. unknown miles but gears have good wear pattern. From PA and not rusty. UCA bushing need to be replaced on driver's side. has been wheeled.
the plan is to gear a HP30 to 4.10 and i dont want to kill this one if someone wants it. so...
$125 or $75 + HP30 housing
Title: Re: HP30 w/ 3.73s
Post by: MrMindless on March 27, 2012, 08:48:37 AM
did he say it was complete when you bought it? sounds like "dustin complete" ::)
Title: Re: HP30 w/ 3.73s
Post by: Spencer on March 27, 2012, 02:22:28 PM
it was pretty complete when i bought it. unit bearings are ehh. brake are ehh. i wouldnt reuse them. shafts are my spares for when i finally blow by CVs in my ZJ. they are still kicking with the 33" TSLs. smike will verify, i gave them hell at rausch in january. we'll see if they last this weekend too!
i'll throw in the unit bearings and calipers if someone wants those. i could have a set of ujoint shafts in rochester by mid may if someone wants them to go with it for a few extra $$. i anticipated someone throwing it in a TJ or doing it with a 3.73 geared 8.8, or something like that.
Title: Re: HP30 w/ 3.73s
Post by: etk300ex on March 28, 2012, 08:07:15 AM
Is this a front rear? ;D ;D :P
Title: Re: HP30 w/ 3.73s
Post by: smichaelR22 on March 28, 2012, 11:23:17 AM
o man this is from bigZJ? haha
Title: Re: HP30 w/ 3.73s
Post by: Spencer on March 28, 2012, 02:53:58 PM
hahaha yeah i guess i should have gone with the typical axle ad. something like:
hey guys,,,,what i have here is a dana 30 rear out of a a jeep,,,,i dont know what gears its got,,,i can look if you want it,,,well i bought it from this guy,,,he said it needs new seals,,,,i dont know anything about it,,,come look for yourself,,,the guy i got it from said it was complete,,,,,i want $600 for it because thats what i paid,,,i gotta sell because the wife is bitching about to much in the garage,,,i can txt pics to ur phone
Title: Re: HP30 w/ 3.73s
Post by: MrMindless on March 28, 2012, 03:46:47 PM
perfect! :)
Title: Re: HP30 w/ 3.73s
Post by: Spencer on May 01, 2012, 08:41:40 PM
build is changing directions... this needs to go.
i have already bought a really nice set of 4.10 gears for it and a master install kit (needs seals).
so hp30 + 4.10 gears + install kit ...$250
also have a ford 8.8 with 4.10 gears. open. $175.
this could make a sweet swap for a TJ...
Title: Re: HP30 w/ 3.73s
Post by: bear555 on May 05, 2012, 09:28:07 PM
Sorry i got lost, what happened to the 3.73?
Title: Re: HP30 w/ 3.73s
Post by: Spencer on May 06, 2012, 03:36:33 PM
sorry, it did get confusing. here is what i have
Item 1: High Pinion Dana 30. 3.73 gears installed. no shafts
Item 2: HP30 Ring and pinion. 4.10 ratio. vgc
Item 3: Ford 8.8. 4.10 gears. complete.
Title: Re: HP30 w/ 3.73s
Post by: bear555 on May 07, 2012, 06:22:23 AM
I'll take the 3.73 axle. I'll PM you my Phone #
Title: HP30 w/ 3.73s
Post by: MrMindless on May 07, 2012, 06:48:35 AM
Disk or drum 8.8?
Title: Re: HP30 w/ 3.73s
Post by: Spencer on May 07, 2012, 11:38:17 AM
