I unfortunately have given up trying to find the time and money to finish my rocked crawler project. This post will be one of many. I\'m selling EVERYTHING for the project including the frame and shell (spotless CUCV). Below is this listings for the first few things I have unpackaged and have on ebay. If you are interested in anything list (or anything you may need that I probably have) just drop me a line and we can handle it here. Thanks again and feel free to drop me a line with any question.
GM NP205 Fixed Yoke
K5 CUCV 6.2 Diesel Oil Pan & Valve Cover Set
GM Corp 14 Axle Hub CUCV Offroad
Dana 44 Flat Top Knuckle Set CUCV Offroad
GM NP205 Transfercase Housing CUCV Offroad
6.2 Diesel Flex Plate CUCV Offroad
*** UPDATED *** UPDATED *** UPDATED ***
Also, just a list of things to come. Drop me a line on any interests:
AXLES / DRIVE SHAfTS:
1985 GMC Dana 44 Front Axle, 3.73 Ratio (6 or 8 Lug) – USED
1983 CHEV Corp 14 Rear Axle, 3.73 Ratio (8 Lug W/Out Drums)
1979 Dana 44 Knuckles (Pair), Drilled & Taped for Crossover) NEW
1980 Dana 44 Knuckles (Pair) – USED
1983 Dana 44 Spindles (Pair) – USED
2009 U-Bolts (Custom), Dana 44 = Set for 1 Axle w/ Hardware- USED
2009 U-Bolts (Custom), Corp 14 = Set for 1 Axle w/ Hardware- USED
2009 DIY4X Corp 14 UD Spring Plates (Primed & Painted) – USED
2002 Offroad Design – Sway Bar Correction/Disconnect Kit - NEW
UNK Poison Spider Corp 14 “Rock Ring” – Diff Guard - USED
COOLING:
2009 Radiator 6.2 Diesel Radiator (A/M) – NEW
1999 Aux Transmission Cooler (B&M) – USED
ENGINE / RELATED:
1985 GM 6.2 Diesel Engine (Rebuild 30k W/ NEW Recon heads,) COMPLETE
1999 Injection Pump (6.2 Diesel), - NEW REBUILD
UNK (8) Fuel Injectors, NEW REBUILD (Tested & Calibrated)
1983 GM 6.2 J Code Air Intake- USED
2009 Power Steering Pump (A/M)- NEW
1985 GM 6.2 Diesel Crank – NEW – (Needs to be polished = Surface Rust)
1985 (8) GM 6.2 Diesel Pistons –USED
1985 (8) GM 6.2 Diesel Connecting Rods –USED
TRANSMISSION
1985 GM 700R4 Trans. (4 WD, 60k on Rebuild w/ New Torque Conv) –USED
2005 Northwest FabWorks Dual Transfer Case Adapter (for GM NP205) – NEW
1985 GM NP208 Transfer Case (130k Approx), Complete (700R4 Input) – USED
1984 GM NP205 Transfer Case (89k Approx), Complete (TH400 Input) – USED
1983 GM NP203 Range Box ONLY (Mile Unk), (TH350 Input) – USED =
1983 GM NP203 Input Shaft from TH350- USED =
1985 NP208 to 700R4 Adapter Plate- USED =
1983 NP205 to TH350 Adapter Plate- USED =