92 toyota

[etk300ex]

Some big dogs carnage, cage turned out to be a good idea  :oops:

[etk300ex]

Swapped my other set of $50 rims and tires on at and attempt to get wider.  Rims are a lot wider and a lot more back spacing, or is that less back spacing? Anyway I think shes around 6\" wider, should have measured but I\'m not that smart.  Yes those are 38.5\'s Hawgs :lol1:

edit: 1st pic hawg left, swamper right

 

[etk300ex]

Lots of plans tossed around this winter:

1) Tons. Figured I got $1100 into my front toy axle, and need another $1000 to make them solid :-o. Should of went with tons right off the batt. But decided its too late now, I\'d lose my butt on selling them, lesson learned. I\'ll keep wheeling these until they break.

2) Auto. Really, really wished I had an auto at big dogs.  I\'d need a A340f toy trans, unknown bell housing to bolt up to the 22re, marlin v6 to gear driven t-case adapter, 23 spline t-case input, top shift kit, shifter controls, who knows miscellaneous.  Nope, too much $ for this pile.

3) Duals. All ready have an extra t-case in trade for a pitcher I think, thanks mindless. Just need a dual adapter and a top shift kit, new cross member which I should do anyway, and rear shaft which I need anyway. Its the next best thing to an auto, this will probably happen next trail gear sale.

4) Hydro. It would be nice but steering would be better if I moved the steering box ahead and put a full length pitman arm on there. Meh, more wheeling money.

5) Lower? Shorten the front shackle and 1-1/2\" or so (I like the spring pack as is) and pull a couple leaves out of the back (really stiff anyway).  

What needs to get done:
1) PS cooler
2) rear shaft
3) move steering box ahead 2-3\"
4) install seats, buy harnesses.  Safety first :-D
5) quiet that fuel pump down, way annoying!
6) 5th stud mod on knuckles

[etk300ex]

Picked up a set of these in blue on the cheap.  There a little ricer but hey, its a toyota :-D

[img align=right width=300]http://www.manufacturer.com/cimages/product/www.alibaba.com/0308/v/11255623_Tenzo_Racing_Sport_Type_R_Evolution_Racing_Seats.jpg[/img]

[etk300ex]

Still runs :-)

[MrMindless]

your wheeling location is blurry.  how does that affect picking a line? does it make you blurry too? what causes it?

[etk300ex]

its a top secret location, only I can see it clearly :)

[etk300ex]

vroom vroom

[matt]

You need a set of beadlocks ....

[etk300ex]

Haha, I\'d like too but its not on the priority list right now.  

[etk300ex]

Yikes, just looked at the calendar, after my test I will have 2 weeks to get this puppy ready for the spring fling :-o

[etk300ex]

seats in

swampers swapped to wider rims

fuel pump quieted

battery mount fixed

vacuumed :-D

[etk300ex]

1. [d]rear square shaft.[/d]
     -carrier bearing order

2. Move steering box ahead.
     -[d]TG reloc kit[/d] ordered
   
3. PS cooler.
     -[d]Cooler/lines,Summit PS cooler kit[/d] ordered
   
4. [d]why-o-why is my fuel pump so loud.[/d]

5. [d]install seats[/d] & [d]harn[/d]ess\'s.  
 
6. [d]suspension.
     -take a leaf or 2 out of rear.
     -shorten front shackle[/d]

7. [d]battery mount failed during roll over.[/d]
 
8. check fluids & grease n stuff,
     
19. [d]swap swampers over to wider rims.[/d]

[JWOK]

Sweet build thread! Too bad its not a JEEP... We could cut the top off this weekend so you can go topless, but thats right you cant drive the toyota to the mall to crawl anyways! Don\'t forget to try and get some info on that locker for me. Tks

[etk300ex]

I forgot already haha, do you really need lockers to drive to work and back anyway? :-D

Post an intro with some pics of that hog.  Maybe some of your old one too since you bought this one :lol1: