Exhaust bending?

[GTJake]

can anyone on here bend exhaust?

i need to replace the exhause on my XJ, before i buy new parts i thought i would ask here

[Soileater]

my muffler was rusting off, so i went to Cole mufflers and had them put just a straight pipe, sounds nasty. was like 70 bucks well worth it in my opinion.

[GTJake]

i bought the tail pipe and a new muffler from auto zone for $60. I have a used cat im going to try to use. I just have to figure out a way to re-install my o2 sensor...

[GTJake]

and Im running straight exhaust right now, took my gas mileage from mid 20s down to 13. now trhat ive done a complete tune up im expecting to get upper 20s when exhaust is complete

[bear555]

I picked these up from parts plus on lake ave for cheap, I don\'t remember how much but it was less than what auto zone wanted.
 (first attempt and uploading pic)

[bear555]

Oh and you probably allready know this but you should jack up your body (not the axle) to get the tail pipe past the axle. If you have a bigger lift it might not be needed.

I had taken a bunch of pictures as if I was going to do a write up but then I decided it was to noob ish.

[GTJake]

my parts should be in by lunchtime today so well see if i have enough lift to make it work or not. thanks for the input.