http://www.sharetrails.org
2019 Roxor

Author Topic: 2019 Roxor  (Read 44 times)

Offline ChrisBeyer

  • Newbie
  • *
  • Posts: 7
2019 Roxor
« on: August 02, 2020, 03:24:19 PM »
I've been slowly upgrading the buggy since we got it last December. I wasn't sure which direction I would go at first, but now I'm confident it will be a trail rider/crawler (as opposed to a mudder). The next step is some modification to the stock ROPS. It's a six point cage made with 1.75" tubing, not sure exactly what the specs are. I'm planning on using 1.75" DOM for any additions. I think the stock cage is strong enough to protect us, but I don't think it will hold up to repeated abuse. It also doesn't provide any attachment points for the shoulder belts of the five point harnesses.  I'm thinking the first step will be adding to the main hoop in the configuration shown with the yellow string in the attached image. This is my first rollcage project, I'm interested in what y'all think.

'19 Mahindra Roxor

Offline Wingman

  • Club Member
  • Hero Member
  • ***
  • Posts: 1801
Re: 2019 Roxor
« Reply #1 on: August 02, 2020, 07:32:41 PM »
"Nodes" are good, triangles are good, gussets are good. Avoid shearing forces.

Online MrMindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 3403
Re: 2019 Roxor
« Reply #2 on: August 03, 2020, 04:53:57 AM »
Also good: shoulder belts close to level from shoulder to mount. The seat holes may or may not be useful but don’t really help on that angle because they’re not really structural.
Michael Maskalans
#571 Last Minute Motorsports
High Miler: 07.5 Ram 6.7 6sp 4x2, ARB, 19.5s
98 TDI beater
Road Block: 98 Dakota Lockright HP 60/Welded 10.25, 5.38s, 203/205 triple stick, 42" SXs
Dumpbus: 97 Ram 24v P-pumped, RoadRanger 13sp
'87 AMC Eagle Wagon

 

test block /modules/smf/index.php?topic=3950.msg31947