http://www.m4wdfabrications.com/
How to straighten a bent tie rod

Author Topic: How to straighten a bent tie rod  (Read 5425 times)

Offline Wingman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1979
How to straighten a bent tie rod
« on: May 29, 2013, 02:15:04 PM »
While not recommended in any way, here is one lazy man's way to re-"straighten" a bent tie rod...




Not perfect but somewhat straighter...


Offline MrMindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 3453
Re: How to straighten a bent tie rod
« Reply #1 on: May 29, 2013, 03:23:21 PM »
love it!
Michael Maskalans
#571 Last Minute Motorsports
High Miler: 07.5 Ram 6.7 6sp 4x2, ARB, 19.5s
2003 R'Audi Allroad 6sp
Road Block: 98 Dakota 203/205 triple stick, 42" SXs
Dumpbus: 97 Ram 24v P-pumped, RoadRanger 13sp
'87 AMC Eagle Wagon

Offline jACeL86

  • Sr. Member
  • ****
  • Posts: 271
Re: How to straighten a bent tie rod
« Reply #2 on: May 29, 2013, 04:17:52 PM »
I prefer to stick one and in a cheesy stock bumper and watch trunks pull on it until he about goes ass over teakettle on Rock Creek!
'06 Rubicon, 5.5"RE tri-rear, 37" Trxus, Metal Cloak gear

Offline etk300ex

  • Club Member
  • Hero Member
  • ***
  • Posts: 936
How to straighten a bent tie rod
« Reply #3 on: May 30, 2013, 06:46:50 AM »
Looks like its time for an HD unit mark!
06 Frontier 4x4
03 Ram CCLB 4x4
84 Viking truck camper
92 Toyota Truggy gone
Mountain bikes, it's cheaper and smaller

Offline Wingman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1979
Re: How to straighten a bent tie rod
« Reply #4 on: May 30, 2013, 08:18:14 AM »
It's more HD than the stock unit.  It's the V8 GC "upgrade".  Solid shaft vs. hollow tube.  Otherwise, there would be no re-bend and re-use...

 

test block /modules/smf/index.php?topic=3237.0