http://www.m4wdfabrications.com/
Ford 8.8 and Hp Dana 30

Author Topic: Ford 8.8 and Hp Dana 30  (Read 5520 times)

wnyjpgy

  • Guest
Ford 8.8 and Hp Dana 30
« on: November 16, 2010, 11:25:49 AM »

These are out of a 95 Jeep Wrangler that is sprung over.

The rear axle is a Ford 8.8 with disk brakes. It has 4.88 gears, ARB ,and brackets for a traction bar. He has extra shafts to go with it.

The front axle is a HP Dana 30. This has the larger axle shaft kit installed (super 30, which is a 1 piece long side axle shaft), which includes larger spline chromo shafts, and ARB with 4.88 gears. There are also spare standard alloy Super 30 shafts to go along with it. This axle has a high steer knuckle on the passenger side so the drag link clears the leaf spring.

I\'m sure he has a bunch of extra steering parts as well.

He\'s looking for $2000 for both of the axles and spares.

He also will have his 36\" Iroks and beadlocks up for sale very soon, as well and his 231 transfer case with a fresh 4 to 1 kit installed.

If there are any questions, please direct them to me.

Parts are located south of buffalo for inspection (Jeep is currently still together).

Offline CoraC143

  • Hero Member
  • *****
  • Posts: 1248
Re: Ford 8.8 and Hp Dana 30
« Reply #1 on: November 16, 2010, 11:35:44 AM »
nice signature  :scared:

Offline Wingman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1982
Re: Ford 8.8 and Hp Dana 30
« Reply #2 on: November 16, 2010, 01:03:24 PM »
May be interested in the wheel/tire package.  More info would be helpful.

wnyjpgy

  • Guest
Re: Ford 8.8 and Hp Dana 30
« Reply #3 on: November 16, 2010, 01:15:03 PM »
The wheels are MRW. Marsh Racing Wheels and are 17\"/

Here\'s the best picture I have.

Let me find out what he wants for them.

Offline MrMindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 3454
Re: Ford 8.8 and Hp Dana 30
« Reply #4 on: November 16, 2010, 03:54:33 PM »
going class 3 with it?
Michael Maskalans
#571 Last Minute Motorsports
High Miler: 07.5 Ram 6.7 6sp 4x2, ARB, 19.5s
2003 R'Audi Allroad 6sp
Road Block: 98 Dakota 203/205 triple stick, 42" SXs
Dumpbus: 97 Ram 24v P-pumped, RoadRanger 13sp
'87 AMC Eagle Wagon

Offline rejeep

  • Hero Member
  • *****
  • Posts: 629
Re: Ford 8.8 and Hp Dana 30
« Reply #5 on: November 17, 2010, 07:26:31 AM »
might be interested in the axles...

more importantly... might be interested in putting a different logo on that jeep..

wnyjpgy

  • Guest
Re: Ford 8.8 and Hp Dana 30
« Reply #6 on: November 17, 2010, 09:02:12 AM »
Mike,

We are still legal in class 2 with the changes we are making. We\'ll just be alot more competitive.

Changes,

Spidertrax 609 front, Fabricated knuckles, hydro assist, true high 9 center with a bunch of anodized bling, detroit and 4.88\'s
 

Rock Jock 60 rear, ARB, 4.88\'s

Cutting Brakes on all 4 corners.

4.3 Chevy (TBI)
Turbo 350 Trans
4.3 Atlas

It should be much more competitive the years previous.

Arie,

If your interested in parts, or sponsership please let me know.

Ryan, Erik, and Mike, got to see me spot Bunny Rose at Big Dogs, but they didn\'t get to see the 043 jeep compete.

Keep me posted.

Offline rejeep

  • Hero Member
  • *****
  • Posts: 629
Re: Ford 8.8 and Hp Dana 30
« Reply #7 on: November 17, 2010, 10:03:23 AM »
Deff axles...
would save me the trouble of regearing..

only difference I am sprund under and like it down there..

Let me crunch some numbers.. but I am deff interested..

wnyjpgy

  • Guest
Re: Ford 8.8 and Hp Dana 30
« Reply #8 on: November 17, 2010, 10:20:40 AM »
Like I said, let me know.

Putting them back to Sprung Under isn\'t a big deal.

 

test block /modules/smf/index.php?topic=2187.0;prev_next=prev