Fingerlakes 4X4 Forum

TECHNICAL FORUMS => Project Builds => Topic started by: JWOK on January 04, 2014, 07:28:51 PM

Title: 07 JKU build
Post by: JWOK on January 04, 2014, 07:28:51 PM

So i guess it's time to do a sweet build thread of my rig.

Specs
3.8l minivan powered
Auto with extra cooler
X model nothin fancy
Mixed parts "lift kit" Bds springs and some arms
Dynatrac PR44 up frt with a Detroit locker
Rcv's
Stock rear d44
5.13 gears
Antirock sway
Homebrew hyd assist
Synergy full cage
Bumpers and stuff
MORE eng/trans skid
37" mtr-k's
Raceline Beadlocks
Superchips

I'm sure there is more




Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1)

Title: Re: 07 JKU build
Post by: JWOK on January 04, 2014, 07:34:38 PM

(http://img.tapatalk.com/d/14/01/05/una7erez.jpg)(http://img.tapatalk.com/d/14/01/05/uzy3ajun.jpg)(http://img.tapatalk.com/d/14/01/05/9aqara5e.jpg)(http://img.tapatalk.com/d/14/01/05/nederypu.jpg)(http://img.tapatalk.com/d/14/01/05/a8ahe8yz.jpg)(http://img.tapatalk.com/d/14/01/05/e3ypasuh.jpg)(http://img.tapatalk.com/d/14/01/05/erure6u8.jpg)

Title: Re: 07 JKU build
Post by: JWOK on January 04, 2014, 07:39:59 PM

(http://img.tapatalk.com/d/14/01/05/betapebu.jpg)(http://img.tapatalk.com/d/14/01/05/u9ujy2uh.jpg)(http://img.tapatalk.com/d/14/01/05/ny7y2aga.jpg)(http://img.tapatalk.com/d/14/01/05/5emu2e6u.jpg)(http://img.tapatalk.com/d/14/01/05/by9y4etu.jpg)(http://img.tapatalk.com/d/14/01/05/ujy5u3yh.jpg)(http://img.tapatalk.com/d/14/01/05/7umu8abu.jpg)(http://img.tapatalk.com/d/14/01/05/ehyhe2a8.jpg)(http://img.tapatalk.com/d/14/01/05/5e3azysy.jpg)(http://img.tapatalk.com/d/14/01/05/y9avu6a2.jpg)(http://img.tapatalk.com/d/14/01/05/quburutu.jpg)(http://img.tapatalk.com/d/14/01/05/2ery6umu.jpg)


Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1)

Title: Re: 07 JKU build
Post by: JWOK on January 04, 2014, 07:47:19 PM

(http://img.tapatalk.com/d/14/01/05/ze9a8yhu.jpg)(http://img.tapatalk.com/d/14/01/05/ymy9a8eq.jpg)(http://img.tapatalk.com/d/14/01/05/atanatyr.jpg)(http://img.tapatalk.com/d/14/01/05/etetase9.jpg)(http://img.tapatalk.com/d/14/01/05/azu7u6ud.jpg)(http://img.tapatalk.com/d/14/01/05/ybedaraz.jpg)(http://img.tapatalk.com/d/14/01/05/e8e2adeh.jpg)(http://img.tapatalk.com/d/14/01/05/5egu3y8u.jpg)(http://img.tapatalk.com/d/14/01/05/y6abena8.jpg)

Title: Re: 07 JKU build
Post by: JWOK on January 04, 2014, 08:00:35 PM

(http://img.tapatalk.com/d/14/01/05/ujy4ejy9.jpg)(http://img.tapatalk.com/d/14/01/05/apebaset.jpg)(http://img.tapatalk.com/d/14/01/05/6y6yve6a.jpg)(http://img.tapatalk.com/d/14/01/05/puby7ata.jpg)(http://img.tapatalk.com/d/14/01/05/eme6eren.jpg)


Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1)

Title: Re: 07 JKU build
Post by: etk300ex on January 11, 2014, 04:56:09 PM

nice!

Title: Re: 07 JKU build
Post by: JWOK on February 01, 2014, 09:19:38 PM

Going to be making some adjustable control arms for this pig. Any suggestions on which way to go for heims/johnnyjoint? I am leaning toward ruff stuff heims. One end will be poly bushing.


Sent from my iPad using Tapatalk

Title: Re: 07 JKU build
Post by: Wingman on February 01, 2014, 10:07:36 PM

RuffStuff is the way to go.

Title: Re: 07 JKU build
Post by: smichaelR22 on February 13, 2014, 09:50:11 AM

we did heim to heim and 2x2x.250 wall square on Alex's JK seemed to work out ok.  dont be afraid to go 1.25" heims. if you do go with bushings on one side, order up a couple BUSH kits to have some replacements on hand. its not easily found on the site but you can just order the poly and insert without the sleeve. 

Title: Re: 07 JKU build
Post by: Wingman on February 13, 2014, 08:20:16 PM

No sleeves?  ???

Title: Re: 07 JKU build
Post by: MrMindless on February 14, 2014, 10:06:24 AM

To replace the blown out poly down the road.


Tapatalk (http://tapatalk.com/m?id=1)ing in traffic

Title: Re: 07 JKU build
Post by: Wingman on February 14, 2014, 10:09:30 AM

Oh, my bad.  I was thinking of initial install without sleeves.  No good.  :-[

Title: Re: 07 JKU build
Post by: MrMindless on February 14, 2014, 10:16:22 AM

Dakota had no sleeves. 3/4" gr8 bolt.  Meh :)


Tapatalk (http://tapatalk.com/m?id=1)ing in traffic

Title: Re: 07 JKU build
Post by: smichaelR22 on February 14, 2014, 11:46:45 AM

wrong use of words sorry you can order the polly and the bolt sleeve with out the 2"x.250 part for cheaper.  good to have some on hand for replacements.  They get replaced just about every race with 571

Title: Re: 07 JKU build
Post by: JWOK on February 26, 2014, 05:58:13 PM

Thanks for the input guys. Gonna get some heims ordered up.

Title: Re: 07 JKU build
Post by: OffRad on March 17, 2016, 11:03:34 PM

nice! any updates about this build? do you have additional mods?

Title: Re: 07 JKU build
Post by: CARiD on April 26, 2016, 04:58:20 AM

What a great build!