TECHNICAL FORUMS => Project Builds => Topic started by: smichaelR22 on September 04, 2011, 10:48:10 PM
Title: ryans new 4 seater
Post by: smichaelR22 on September 04, 2011, 10:48:10 PM
i am working on a new project, a 4 seater chassis for Ryan. he has an LQ4 6.0L waiting, and atom is sold!
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 05, 2011, 11:28:17 PM
today\'s progress
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 13, 2011, 09:50:20 AM
motor hangin
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 13, 2011, 09:53:17 AM
motor hanging
Title: Re: ryans new 4 seater
Post by: etk300ex on September 13, 2011, 11:54:16 AM
you tha man!
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 15, 2011, 01:30:55 PM
motor and case mounted, ryan and liz dropped off all the seats yesterday too!
Title: Re: ryans new 4 seater
Post by: Ryan_25 on September 15, 2011, 05:03:27 PM
This is looking to be a very stout buggy. Smike is doing a great job with it. He can fabricate about 10x better than I can. I am excited for next season.
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 16, 2011, 11:46:53 AM
motor, trans, case, mounted with good poly
Title: Re: ryans new 4 seater
Post by: matt on September 16, 2011, 12:30:26 PM
Looking good. Boy I wish I had the time you do....
Is it the camera angle or is the engine sitting at a good angle in the last picture.
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 16, 2011, 03:00:13 PM
engine is where i could put it to keep it as low as possible and have room for radiator and feet. should be fine!
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 16, 2011, 03:02:23 PM
the case is mounted a little farther back than mine, but mine was set crammed for a single piece front, we are planning on a 2 piece front from the start.
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 19, 2011, 09:02:33 AM
progress
sub complete, a few more tubes, cell mounted, seat mounts in process.
Title: Re: ryans new 4 seater
Post by: matt on September 19, 2011, 11:17:13 AM
I like
What tire size is he shooting for 40-42?
Title: Re: ryans new 4 seater
Post by: smichaelR22 on September 19, 2011, 01:26:50 PM
39-40 maybe 42 ya
Title: Re: ryans new 4 seater
Post by: smichaelR22 on October 20, 2011, 12:36:26 PM
coming out of the shop tomorrow!
all linked up and ready to go.
Title: Re: ryans new 4 seater
Post by: smichaelR22 on October 22, 2011, 02:38:31 PM
Ryan picked it up today!
Title: Re: ryans new 4 seater
Post by: smichaelR22 on October 22, 2011, 07:34:38 PM
she looks good!
Title: Re: ryans new 4 seater
Post by: Ryan_25 on October 24, 2011, 08:20:39 AM
Thanks to everyone that came out to lend a hand on Friday. We had everything moved out of Mikes \"shop\" in a very short time.
Mike did an excellent job on the chassis, I am 100% happy with the results. Now I just have to finish it up.
Title: Re: ryans new 4 seater
Post by: AussieLocker on October 25, 2011, 09:50:17 AM
Mike, that is a real professional job! I am really looking forward to the finished buggy.
Title: Re: ryans new 4 seater
Post by: smichaelR22 on October 25, 2011, 10:35:29 AM
thanks guys! starting on the next one hopefully this weekend for a customer! Should be moving into the new shop next week!
Title: Re: ryans new 4 seater
Post by: carchameleon on November 19, 2011, 09:25:11 AM
this thing done yet?
Title: Re: ryans new 4 seater
Post by: Ryan_25 on November 19, 2011, 09:18:13 PM
No. I have not done much to it.
Title: Re: ryans new 4 seater
Post by: smichaelR22 on November 28, 2011, 12:23:52 PM
Ryan dropped this off to the shop last week for a little more work and he will be grabbing it before the meeting tomorrow.
Floors, fire walls, petal mounts, steering mount, side tins, roof, and battery mounts done!
moving along!
Title: Re: ryans new 4 seater
Post by: smichaelR22 on November 29, 2011, 12:35:19 PM
she is looking good, ready for Ryan to pick up tonight. We should see the Aussie locker trailer at the meeting!
Title: Re: ryans new 4 seater
Post by: Ryan_25 on December 06, 2011, 09:04:20 PM
Title: Re: ryans new 4 seater
Post by: smichaelR22 on December 06, 2011, 11:41:45 PM
whose sweet shop is that?
Title: Re: ryans new 4 seater
Post by: Ryan_25 on December 07, 2011, 08:38:23 AM
I put the other side tin on last night, then watched a pre-release of an upcoming video from HMC. Will did a great job as usual. Check out his videos. http://heavymetalconcepts.com/
Tonight my plan is to do the trans cooler and lines.
Title: Re: ryans new 4 seater
Post by: Ryan_25 on January 01, 2012, 09:47:57 AM
It runs.
Well it starts anyway, I dont have the coolant lines hooked up yet or the O2 sensors, so I only let it run a few seconds.
Title: ryans new 4 seater
Post by: etk300ex on January 01, 2012, 10:37:02 AM
:burnout:
Title: Re: ryans new 4 seater
Post by: smichaelR22 on January 03, 2012, 04:42:00 PM
this thing sounds bad ass
Title: Re: ryans new 4 seater
Post by: Ryan_25 on January 05, 2012, 10:39:44 AM
Its getting close.
Title: Re: ryans new 4 seater
Post by: jACeL86 on January 05, 2012, 06:43:04 PM
Prove it!
Title: ryans new 4 seater
Post by: etk300ex on January 06, 2012, 07:04:37 PM
I heard it :)
Title: Re: ryans new 4 seater
Post by: matt on January 17, 2012, 12:58:21 PM