PUBLIC FORUMS => General Discussion => Topic started by: k9keeper on July 06, 2010, 06:34:04 AM
Title: Have welder will travel?
Post by: k9keeper on July 06, 2010, 06:34:04 AM
Honest, it sounded like a rock, but apparently it was a can opener.
So I need some welding help on this, since I lack a welder and the skills.
Title: Re: Have welder will travel?
Post by: Wingman on July 06, 2010, 08:08:27 AM
Nice job!
I\'ve got a little of both but lack the time this week. If it can wait...
Prep work will take the most time. Beat that thing back into shape and put a grinder to the sides of the tear(sp?). Maybe some additional steel to brace it in a few spots?
My $.02 but I will let the pros here weigh in.
Title: Re: Have welder will travel?
Post by: smichaelR22 on July 06, 2010, 08:27:54 AM
thats pretty!
not sure on my schedule this week, may be free wednesday or friday nights- maybe call erik and cora since they have a new welder thats now more portable- trade for a dog watch day? lol
Title: Re: Have welder will travel?
Post by: Camo1Ton on July 06, 2010, 11:26:25 AM
Cool cinematography on the first shot. Check that spindle!
Title: Re: Have welder will travel?
Post by: ollllllo on July 06, 2010, 11:44:58 AM
Wow mike that\'s a good one. Id love to help out , but this week is bad for us too. Since I worked july 4th weekend, cora and I are going wheeling for my birthday this weekend. Fri-sun, hopefully we are bringing the puppies to your kennel. So needlless to say my next few nights are full prepping the two jeeps. You are more than welcome to borrow any of my welders, like smike said, I just got a new miller that runs on 110v and 230. (No special plug needed) or I have a couple ready welders, and another 110v that would prob work fine. Your welcome to try any. If no one else can make it over before we return, I could swing by mon evening after work. We are working on the lake in webster.
Definetly will want to reinforce the seam with additional steel.
Title: Re: Have welder will travel?
Post by: k9keeper on July 06, 2010, 01:57:36 PM
This does not need to be done this week. Need to get some steel to reinforce. Would you use 2 or 3 inch wide pieces to place over the tear or do something larger?
Title: Re: Have welder will travel?
Post by: Wingman on July 06, 2010, 02:08:26 PM
Probably anything to span the gap some. Whatever you can scrounge should be OK.
Title: Re: Have welder will travel?
Post by: MrMindless on July 08, 2010, 04:55:28 PM
how thick is that deck steel?
do you have 230v available there?
it looks like there\'s a nice gouge around the edge of blade swing.... bearing failure coming soon, perhaps?
Title: Re: Have welder will travel?
Post by: k9keeper on July 09, 2010, 02:02:49 PM
I measured it as 1/8 inch. Some Googling yields 10 gauge.
230v, not at the moment, but there is spare breakers in the box in the garage. So I can get there without a lot of trouble.
As far as bearings. It seems run fine without rattling. I figured the deck is flexible :roll:
Title: Re: Have welder will travel?
Post by: Crusarius on July 13, 2010, 11:13:45 AM
those spindles are damn near indestructible. I did the same thing. cut the deck off in 3 pieces and replaced it.
whatever you do don\'t create flat spots for the blades to hook on. if anything run a long flat piece of 1/8\" right over the top and stick it back down. guarantee you its not the last time this will happen.
bummer that looks like its stamped steel. mine was angle frame with 10 gage plates.
Title: Re: Have welder will travel?
Post by: ollllllo on July 14, 2010, 06:06:17 PM
let me know when you might want to fix this.
My schedule next week is a little slower. after work maybe?
Title: Re: Have welder will travel?
Post by: Wingman on July 19, 2010, 01:01:40 PM
Is it fixed yet? If not, how does tomorrow look? I\'m off...
Title: Re: Have welder will travel?
Post by: k9keeper on July 20, 2010, 03:59:31 PM
Typical SNAFU, I managed to break the tractor now, so now I cannot move out of the field to get it somewhere to be welded
Having the tractor fixed and I am going on vacation next week. So I shall worry about it in August
Title: Re: Have welder will travel?
Post by: CoraC143 on July 20, 2010, 04:33:40 PM
Ready Welder!!!
Title: Re: Have welder will travel?
Post by: Wingman on July 20, 2010, 04:43:47 PM
